Thomson SINGLE StEP eXtreme Filter Vials. Provide multilayer filtration for viscous samples and samples containing up to 30% solid particulates. Allow compounds to be separated from matrix, resulting in both higher signal-to-noise ratios and more differentiated peaks. Easy-to-use vials offer fast sample filtration and require only a squeeze of
Filter Vials 0.2um PES w/pre-slit cap. Thomson SINGLE StEP Grey Cap, 100-pk Recommended for samples containing less than 10% solid particulates. Easy-to-use vials offer fast sample
Filter Vials 0.2um PES w/pre-slit cap. Thomson SINGLE StEP Grey Cap, 100-pk Recommended for samples containing less than 10% solid particulates. Easy-to-use vials offer fast sample
Thomson Standard Filter Vials can be used for samples containing less than 10% solid particulates. The filter vial consists of two parts: a filter vial shell and a plunger which includes a single layer filter on one end and a vial cap on the other end. Applications for Standard Filter Vials include filtration of catalysts from organic and
Thomson Filter Vials for HPLC | Chrom Tech. The Thomson PTFE Filter Vials for HPLC can do this easily by mixing the acetonitrile and aqueous solution in the bottom chamber, and then allowing the filter to push down trapping the protei n and letting the clean sample come through for analysis. Filter, vial, and cap—all in one design.
The Thomson nano-Filter Vials (patented) work on most standard Autosamplers, and are designed to speed up sample prep and analysis, while, allowing for minimal volume sample loss (10µL) before analysis. The ease of use will make the SINGLE StEP nano-Filter Vial essential in all laboratories.
Ultra-low dead volume allows you to filter as little as 10 μL of sample and still obtain enough filtrate to make a 2 μL injection. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon.
Certified PES hplc filter vials types whatman-HPLC Vials Supplier. HPLC certified Each batch certified for IC PTFE membrane (for aggress-ive solvents) Mini-UniPrep filter vials for increased throughput Whatman Mini-UniPrep Syringeless Filters provide a faster, easier way to remove Membrane type Nylon PVDF PTFE PP PES . 0.2 μm 057101A 09302117 05713399 05713403 05713389 200/pack 0.45 μm.
Thomson eXtreme Filter Vials 0.2µm & 0.45µm - Filter vials in range of materials including PVDF, PTFE, Nylon and PES. Designed to speed up sample prep.
In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial. Key Features Same Size as a standard HPLC Vial and will fit easily into any machine or tray available for standard HPLC vials.PTFE, PVDF, PES and Nylon membranes are available depending on the percentage of
Thomson SINGLE StEP Standard Filter Vials, Restek. Supplier: Restek. 25894 25897. 10118-322PK 371.6 USD. 10118-322 10118-326. Thomson SINGLE StEP Standard Filter Vials, Restek. Filters Syringeless Filters. Recommended for samples containing less than 10% solid particulates, these standard filter vials are constructed using PTFE or PES for long
Description. Filter Vials 0.2um PTFE w/pre-slit cap. Thomson SINGLE StEP eXtreme Green Cap, 100-pk. Provide multilayer filtration for viscous samples and samples containing up to 30% solid particulates. Allow compounds to be separated from matrix, resulting in both higher signal-to-noise ratios and more differentiated peaks.
Thomson nano|Filter Vial® offer a very low dead volume, allowing one to filter as little as 10μL of sample with enough remaining filtrate to make a 2μL injection. Applications include all low volume samples: analysis of enzymes, peptides, DNA, RNA, synthesis reaction intermediates, finished products, saliva. nano|Filter Vial® specifications.
SEPARA® Syringeless Filter Vials - Thomas Sci. SEPARA® Syringeless Filter Vials. Save time and money in sample prep process with SEPARA® filters and vials disposable device. The single step filtering process is efficient and saves time. Easy to press , fast and simple to use. Rapid sample preparation.
compounds separated from the matrix. Thomson eXtreme|FV® offer multi-layer filtration for viscous samples and samples containing up to 30% particulates. eXtreme|FV® allows for compounds to be separated from the matrix, which results in both a higher signal-to-noise ratio and peaks that are more differentiated.