Home » News » Filter Vials » Sample prep PTFE filter vials supplier Aijiren

Sample prep PTFE filter vials supplier Aijiren

Certified ptfe 0.2 micron filter Aijiren-Voa Vial Supplier Minisart® SRP15 Syringe Filter 17573———-K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PT...


Description

Certified ptfe 0.2 micron filter Aijiren-Voa Vial Supplier

Minisart® SRP15 Syringe Filter 17573----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet.

China 1-4ml-Autosampler-Vials, 6-20ml GC Headspace Vials, 8

8.Vials have a 40% larger opening for easier sample preparation Features 1)9mm screw vials can be used on all common autosampler 2)"Short screw, long neck" to make the autosampler easier to capture 3)9mm wider opening for easy punctur 4)9mm PTFE

Filter Vial at Thomas Scientific

Filters are preassembled filtration devices for the filtration and storage of laboratory samples. These devices are quick and easy to use and feature a plunger, filter, and vial in one unit. They replace syringe-coupled filtration devices with single, disposable units.

Aijiren PTFE and silicone autosampler vial septa exporter manufacturer-Aijiren HPLC Vials

2021/9/22 · high quality 2ml sample vials for sale. The corresponding 9mm screw cap and seal has a septum made of PTFE silicone rubber or natural red rubber. They are sold in several sizes, but wide opening 2ml sample vials is more commonly used. The autosumpra needle

Filter Vial FAQ's

In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial. Key Features Same Size as a standard HPLC Vial and will fit easily into any machine or tray available for standard HPLC vials.PTFE, PVDF, PES and Nylon membranes are available depending on the percentage of organic solvent in the sample and the

FV-2045LE - Filter Vial, Low Evap, 0.45um PTFE, 100/pack

FV-2045LE - Filter Vial, Low Evap, 0.45um PTFE, 100/pack. The Low Evaporation Cap eliminates the pre-slit in the cap membrane allowing the vial to hold sample evaporation to a rate of <.4% over a 24 hour period. This is comparable to standard screw capvials. Filter Vials equipped with the Low Evaporation Cap offer the same characteristics as

Autosampler Vials from Aijiren - Crawford Scientific

Crawford Scientific supply the full range of autosampler vials available from Aijiren Vial integrity, cleanliness, and consistency are critical for today's demanding applications. That is why Aijiren vials are designed using the same engineering expertise that is built

Vials For Hplc at Thomas Scientific

Vials For Hplc found in: Tray for 100x2ml Vials Thermostattable, Vials Autosampler HPLC 2.0mL, 12x32mm, 11mm Crimp, Certified Vial Kits, Clear Vials,.. allows for the use of the patented Poly Crimp Seals or standard aluminum seals. This vial is designed to work auto samples incorporating a robotic arm as well as other auto samplers.

Filter Vial Overview - Thomson | Solutions At Work

Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.

China 10-425 Vial and cap Manufacturers, Suppliers and Factory - Autosampler Vial, Hplc Vial, PTFE Silicone Septa with Cap, syringe filter

2. Wide-opeing vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling. 3. Compatible with autosamplers from Aijiren Technology, Aijiren, Shimadzu, Varian, and Beckman. 4. Certified for full 7.

PTFE Adapter for Aijiren style Glass Inlet Solvent Filter | Like

1 pack. Used on Aijiren HPLC Systems. Accepts 1/8 OD tubing. Adapter for Aijiren style Inlet solvent filter A401010 – see below. PTFE Adapter for Aijiren style Glass Inlet Solvent Filter | Like 5062-8517. £ 5.20. PTFE Adapter for Aijiren style Glass Inlet Solvent Filter | Like 5062-8517 quantity. Add to cart.

Thomson Filter Vials for HPLC | Chrom Tech

The Thomson PTFE Filter Vials for HPLC can do this easily by mixing the acetonitrile and aqueous solution in the bottom chamber, and then allowing the filter to push down trapping the protein and letting the clean sample come through for analysis. Filter, vial, and cap—all in one design.

Mini-UniPrep Syringeless Filters | Aijiren

Mini-UniPrep syringeless filters provide a quick, economical, and environmentally conservative way to filter samples prior to HPLC analysis. They replace the combination of syringe filters, syringes, autosampler vials, septa, and caps with a single disposable unit. Mini-UniPrep allows sample filtration at about 40% of the cost in a third of the

Captiva Syringe Filters | Aijiren

2017/11/22 · Captiva syringe filters are typically used to prepare small-volume samples for HPLC and ion chromatography. They allow for high flowrates and loading volumes, and also extend column lifetimes considerably. Find out more here.

Vials Aijiren | Spectrum - Lab Supplies

Vials Aijiren found in: DWK Life Sciences uLMicroLiter 20 mm Crimp Seal Headspace Vials, J.G. Finneran 2 mL Big Mouth Crimp Top Vials, Thermo.. Save time during sample preparation and reduce the risk of contamination using Aijiren Tech 11 mm

Send Your Inquiry
Name:
Country :
*Email:
Tel/Wts :
*Inquiry:
Have questions?
Please feel free to submit your inquiry information to us !
Copyright 2021 Zhejiang Aijiren Technology, Inc. All Rights Reserved.