Nylon syringe filters are made of nylon membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. Part No. Description. FN1322. 13mm Nylon Syringe Filter 0.22um, Green, 100pcs/pk. FN1345. 13mm Nylon Syringe Filter 0.45um, Green, 100pcs/pk. FN2522.
Hydrophilic Nylon is most ideal for aqueous (non-acidic) or organic sample prep. In addition, Nylon syringe filter for hplc , GC or dissolution trial analysis are among the most popular uses. With its efficient flow characteristics, low extractable levels and mechanical stability, Nylon is the best combination of physical parameters to satisfy essentially the most rigorous analytical needs.
Nylon is commonly used for general laboratory filtration, and filtration of HPLC samples prior to injection. Nylon binds protein, and should not be used when maximum protein recovery is important. Nylon can be sterilized by autoclaving at 120°C, gamma radiation, or ethylene oxide.
Via Roma, 50 - 40069 Zola Predosa (Bologna) - Italy Tel. +39 051 6176311 | Fax +39 051 6176200 | e-mail: [email protected] Cap. Soc. € 1.750.000,00 interamente versersato | C.F. 03636630372
Chromatography sample preparation steps involving multiple consumables like syringe filters, vials, and septa increases costs and time required for sample preparation. Whatman Mini-UniPrep syringeless filters eliminate the need for these separate disposable components and prepare samples in one-third the time required by other methods used for
Non-sterile filters are used in analytical chemistry for sample preparation, HPLC operations, and protecting analytical equipment from particle contamination. Yellow polypropylene housing & microfiber pre-filter layer; nylon membrane; Bulk packaged with filter membrane-type & membrane porosity printed on each filter
Plain white nylon membranes offer low extractables, high uniformity Manufacturer Name - GVS Manufacturer Code - 1213762
• Rapid sample preparation • Single step process, filtering with a plunger in the vial • Sample ready to use after filtration • Pre-slitted cap ensures easy and clean sample transfer • Replace syringe, syringe filter, glass vial and cap, reducing waste • Increase sample integrity with all-in vial and filter
Nylon Membrane Filters, with Grid, 0.45 Micron, 47mm, 100/Pk. Nylon membrane disc filters: 0.45 µm pore-size, 47 mm diameter, pack of 100. Hydrophilic, low-extractable, inert, durable material supported by an internal polyester web. Typically used for HPLC, microbiology, medical/clinical, and general filtration.
GVS Filter Technology Syringe FilterNylon Syringe Filter,0.45 µm Pore Size, 25 mm Membrane Diameter, 500 pieces per box.Nylon (NY)Hydrophilic membrane. Ideal for use in general filtration or medical assays. Superior strength, resistant to a range of organic solvents. Low extractables. High protein binding capacity. Lot-to-lot consistency.Features and BenefitsApplications• Naturally
Nov 09, 2021 · Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered.
GVS™ SEPARA™ 32 mm Syringeless Filter Vial. The SEPARA™ single step filtering process is efficient and simple to use. Manufacturer: GVS™ MV32ANPNY002BC01. View more versions of this product. Catalog No. 10-486-204. $216.50 / Pack of 100. Qty.
45µm RC membrane 2/3" diameter NON-STERILE cap color: Black Housing: PP width: 1/2" height: 1 1/4" internal chamber volume: 480 microliter Filtering Capacity: 450 microliter All in one sample preparation device combines a device auto-sampler, filtration membrane, plug vial and cap/septa.
This GVS Life Sciences part number, 1213812, Nylon filter membrane is Non-Sterile and has a diameter of 47 mm and pore size of 5 µm. These filters come in a pack of 100. This GVS Life Sciences Filter Membrane made of Nylon can be used for applitions that include Clarification of Aqueous and Organic Solvent and HPLC.
pipette each sample into the reservoir on top of every filter. A light press on the station lid will close all 8 filter unit caps. This works like a self-filtering system. The samples pass through the membrane filters, available in a choice of 0.2 µm or 0.45 µm pore size, and are collected directly in your sample vials.