The filter vial consists of two parts: a filter vial shell and a plunger which includes a single layer filter on one end and a vial cap on the other end. Applications for Standard Filter Vials include filtration of catalysts from organic and medicinal chemistry synthesis reactions, saccharide analysis in corn syrup, and in-vial protein precipitation.
2017/1/4 · When filtering samples choose right membrane filter is very important. If you choose wrong syringe filters your filtration will be failed, which can waste a lot of time and money since liquids are normally very expensive. Green BioResearch provides cost-effective non-sterile and individual packed sterile syringe filters from Nylon, PES, PP
Sample Preparation & Filtration SKU: WAT200563 Acrodisc, Minispike Syringe Filter, Nylon, 13 mm, 0.2 µm, Aqueous, 300/case Jump to Jump to Product Description Specifications Product Support Product Description This nylon membrane works well with
2019/12/5 · Nylon PES Aijiren Captiva filter vials provide a convenient way to filter samples before LC or GC analysis. They replace the combination of syringe filters, syringes, autosampler vials, septa, and caps with a single unit. Easy as 1-2-3 Description Part No. 0.45 μm
2017/11/22 · Captiva syringe filters are typically used to prepare small-volume samples for HPLC and ion chromatography. They allow for high flowrates and loading volumes, and also extend column lifetimes considerably. Find out more here.
Sample Preparation by Filtration. Filtration is a separation technique used to concentrate or purify substances based on their physical or chemical properties. It is a simple and routine method used in many laboratories to remove insoluble particles from solutions and to prepare samples for analysis. Filtration is used to reduce sample
Filtration of your samples is important as a preventive maintenance step for HPLC or UHPLC analysis. Keep unwanted particulate matter from entering the injector to increase column life, shorten run time, and optimize peak shape. • Manufactured to a high standard
Filtration –Captiva Filter Vials 13 PP prefilter Vent Fill line Part Number Description 5191-5933 PTFE filter vial, 0.45 µm, 100/pk 5191-5934 PTFE filter vial, 0.20 µm, 100/pk 5191-5935 Nylon filter vial, 0.45 µm, 100/pk 5191-5936 Nylon filter vial, 0.20 µm, 100/pk
6 Mini-UniPrep filter vials for increased throughput Features: • inner glass storage vialConsists of an autosampler vial, plunger with attached membrane filter, and septum/cap • Designed to be loaded directly into the autosampler • Compatible with any autosampler
Maxi-Spin Filter Tubes. 25 mL sample capacity. 50 mL graduated receiver tube and cap. Maximum G-force: 2,500xG. Polypropylene housing. Use with Fixed-angle Rotor Centrifuge. Hold up Volume: less than 20 µL. Max Operating Temp: 50 C.
Disposable filter funnel for solid-liquid separation can be used in chemistry and biological laboratories. The molded funnel has a 10 micron polyethylene fritted disc. Polypropylene filter funnel is designed for use with the CG-1049-J style glass vacuum adapter and a flask or vial.
Milliseal Membrane Seal, PTFE, 18 mm. This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic
Lab basics in materials, sizes, shapes and pore sizes: Filter papers, membrane filters, thimbles, phase separator papers and Benchkote benchtop protectors. Automation-friendly Mini-UniPrep syringeless filters and vials, track-etched and Anopore membranes meet the stringent requirements of pharmaceutical companies.
The Thomson PTFE Filter Vials for HPLC can do this easily by mixing the acetonitrile and aqueous solution in the bottom chamber, and then allowing the filter to push down trapping the protein and letting the clean sample come through for analysis. Filter, vial, and cap—all in one design. Simple to use and easy to press down—No tools required!
Syringeless filters Mini-UniPrep™. The Whatman Mini-UniPrep™ filter provides a quick and easy means of removing particles from HPLC samples. In comparison to other methods the amount of time required for sample preparation is reduced to one third. Mini-Uni-Prep™ is a ready-to-use filter unit consisting of a 0.4ml chamber and a plunger.