Part # 35540-500 Filter Vial 0.45μM hydrophobic PTFE, w/ Pre-Slit Cap Millipore Syringe Filter Part #:SLFHR04NL Millex-FH® Filter, 0.45μM, hydro-phobic PTFE, 4mm, non-sterile Plasticizer Plasticizer Leachable Testing by Takeda® Mass Spec. ES+ Data
Slit septa Mini-UniPrep !lter vial For high-throughput automation. Features and bene ! ts ¥ Slit septum cap enables Mini-UniPrep use with current robotics on HPLC instruments for high throughput automation ¥ D urable yet #exible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is
In addition to 2ml autosampler Vial, Aijiren also produces 4ml autosampler Vial. The usual name of this Vial is 13-425 because its opening is 13mm. The screw neck ensures a good seal and the amber vial can protect Samples that are sensitive to light are not affected by ultraviolet light. 13-425 Amber Glass Vial.
Vial (patented) Part # 35540-500 Filter Vial 0.45M hydrophobic PTFE, w/ Pre-Slit Cap Millipore Syringe Filter Part #:SLFHR04NL Millex-FH® Filter, 0.45M, hydrophobic PTFE, 4mm, non-sterile Plasticizers Testing by Takeda Pharmaceutical Company Limited® UPLC - ELSD
1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials 8-60mL EPA Storage Vials HPLC Syringe Filters About Case
TH-65531-200 Thomson SINGLE StEP Filter Vial with Low Evaporation Cap, PVDF 0.2µm, 2 x pk.100 TH-65531-500 Thomson SINGLE StEP Filter Vial with Low Evaporation Cap, PVDF 0.2µm, 5 x pk.100 TH-65541 Thomson SINGLE StEP Filter Vial with Low Evaporation Cap, PVDF 0.45µm, 1 x pk.100
Phenomenex hydrophilic hplc syringe filter type . 1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials Phenomenex hydrophilic hplc syringe filter type . Low Evaporation Filter Vial, Thomson Instrument Company | VWR. Low Evaporation Filter Vials are equipped with low evaporation caps that
Thomson Filter Vials No multiple step transfers needed. Pre-slit caps for all filter vials, with the exception of the low evaporation caps, ensure a no-hassle, clean aliquot withdrawal. No more breakage of expensive needles or coring problems on the HPLC or Mass Spectrometer. Thomson Filter Vials are compatible with most standard autosamplers.
Thomson Filter Vials No multiple step transfers needed. Pre-slit caps for all filter vials, with the exception of the low evaporation caps, ensure a no-hassle, clean aliquot withdrawal. No more breakage of expensive needles or coring problems on the HPLC or Mass Spectrometer. Thomson Filter Vials are compatible with most standard autosamplers.
Introducing the Low Evaporation Cap Filter Vial The Low Evaporation Cap Filter Vial is a new entry to our expanding catalog of ˜ltration vials. The Low Evaporation Cap eliminates the pre-slit in the cap membrane allowing the vial to hold sample evaporation to a rate of <.4% over a 24 hour period. This is comparable to standard screw cap vials.
The Low Evaporation Cap eliminates the pre-slit in the cap membrane allowing the vial to hold sample evaporation to a rate of <.4% over a 24 hour period. This is comparable to standard crimp cap vials. Filter Vials equipped with the Low Evaporation Cap offer the same characteristics as our standard Filter Vial.
UHPLC™. The ease of use will make the SINGLE StEP Filter Vials indispensable in all laboratories. Filter Vials Patent No. 7,790,117 Worldwide Patents Pending Works on Standard Autosamplers Aijiren Technology ACQUITY® FILTER VIALS IN TRAY Aijiren OR ® Pre-Slit Cap Low Evaporation Cap Case Qty: 200: Part No. 65530-200 Case Qty: 500: Part No
Aijiren offers high-pressure in-line filters designed to prevent blockages and extend column lifetime in any HPLC system, available in different dimensions and . FV-1020LE - Filter Vial, 0.2 um Nylon,Low Evap cap, 100/p. The Low Evaporation Cap eliminates the pre-slit in the cap membrane allowing the vial to hold sample evaporation to a rate of
low volume, viscous, particulate-laden or high volatility organic solvent Thomson has a Filter Vial to fit your needs. Key Features. Same Size as a standard HPLC Vial and will fit easily into any machine or tray available for standard HPLC vials. Available in PTFE, PVDF, PES and Nylon membranes. Pore sizes of either 0.2μm or 0.45μm.
Syringeless Filter Vial – SEPARA Filtering with a plunger in the vial is a rapid single step, reducing sample loss. After filtration, the sample is ready for use in auto-sampling. The pre-slit cap ensures easy and clean transfer of sample. The most useful device for single filtration Easy to press,