Thomson Filter Vials No multiple step transfers needed. Pre-slit caps for all filter vials, with the exception of the low evaporation caps, ensure a no-hassle, clean aliquot withdrawal. No more breakage of expensive needles or coring problems on the HPLC or Mass Spectrometer. Thomson Filter Vials are compatible with most standard autosamplers.
Ultra-low dead volume allows you to filter as little as 10 μL of sample and still obtain enough filtrate to make a 2 μL injection. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon.
Syringeless Filters. Available in a variety of filter media, syringeless filters allow you to process sample loads in a fraction of the time, providing a quick, economical, and environmentally conservative way to filter samples prior to HPLC analysis. These are preassembled filtration devices specially used in HPLC for the purification and
Low Evaporation Filter Vials are equipped with low evaporation caps that ensure <0.4% evaporation over a 24 hour period. This is a significant reduction when compared to standard screw caps. These filter vials are manufactured with attention to detail and high-grade quality to ensure performance at optimal levels.
Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. Part No. Description. FN1322. 13mm Nylon Syringe Filter 0.22um, Green, 100pcs/pk. FN1345. 13mm Nylon Syringe Filter 0.45um, Green, 100pcs/pk. FN2522. Sample prep 0.45um hplc filter vials supplier thomson-HPLC
Thomson Filter Vials. No multiple step transfers needed. Pre-slit caps for all our filter vials for sale, with the exception of the low evaporation caps, ensure a no-hassle, clean aliquot withdrawal. No more breakage of expensive needles or coring problems on the HPLC or Mass Spectrometer.
Thomson SINGLE StEP Filter Vial with Low Evaporation Cap, PTFE 0.2µm, 1 x pk.100: price on request : TH-65540: Thomson SINGLE StEP Filter Vial with Low Evaporation Cap, PTFE 0.45µm, 1 x pk.100: price on request : TH-65531: Thomson SINGLE StEP Filter Vial with Low Evaporation Cap, PVDF 0.2µm, 1 x pk.100: price on request : TH-65541
Filter Vials equipped with the Low Evaporation Cap offer the same characteristics as our standard Filter Vial. Filtering samples in-vial with a 3-step process (deposit sample & dilute, press plunger to filter, place in HPLC). Even with a seemingly homogenous sample, filtering with a Thomson Filter Vial is fast and eliminates HPLC downtime.
THOMSON SINGLE StEP eXtractor3D|FV Filter Vial with Non-Slit Cap low evaporation screw cap with filter membrane PTFE, Nylon, PES and PVDF in 0.2µm and 0.45µm pore size, with increased volume enabling multiple extraction techniques with different resins/sorbents || BGB Analytik ||
Thomson SINGLE StEP Low-Evaporation Filter Vials Description Color Porosity qty. cat.# PTFE (polytetrafluoroethylene) green cap 0.2 µm 100-pk. 25868 blue cap 0.45 µm 100-pk. 25872 PVDF (polyvinyldifluoride) red cap 0.2 µm 100-pk. 25869 Thomson SINGLE StEP Nano Filter Vials Description Color Porosity qty. cat.#
Thomson Instrument Company FILTER VIAL 0.45UM PTFE 200C . Filter Vial 0.45uM PTFE, w/ Low Evaporation Blue Cap Patented. Catalog No. NC0810936. $565.00 / Case of ...
PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods. Note: Polypropylene vials and caps prevent sample contamination from PTFE coated septa. However, since polypropylene caps do not reseal, evaporation occurs after injection. Multiple injections from the same vial are therefore not possible.
11mm Wide Opening Snap-It Caps and Septa are easy to apply and easy to remove and fully compatible with all Snap-It vials. Shop Aijiren Tech™ 11mm Autosampler
Thomson eXtractor3D|FV® Filter Vials is a product uniquely designed for the addition of resins/sorbents, QuEChERS dispersive salts, pills, or special resins in the standard autosampler ready vial. The filter vial consists of two parts: a filter vial shell and a plunger which includes a multi-layer filter on one end and a low evaporation screw
BioExcell Syringe Filters, PTFE, 0.22µm, 4mm, low volume, hydrophilic Item No. 41311583 4mm diameter syringe filters - for low volume, high pressure These Luer-Lok™ syringe filters have the same ultrasonically-welded construction as the other diameter sizes in our line, but are designed for very small fluidic volume (>5ml).