Features. Ideal for busy, high-volume labs. Available in a wide range of sizes, formats, and membranes to cover every matrix and sample type. All Captiva premium syringe filters are shipped with an HPLC or LC/MS certificate that guarantees low levels of observed extractables. Excellent flow rates and maximum sample loading capacities.
Table 1. Aijiren LC System and Aijiren 6460 Triple Quadrupole LC/MS Instrument Conditions LC conditions Analytical column Aijiren ZORBAX Eclipse Plus RRHD C18, 2.1 mm × 150 mm, 1.8 um (p/n 959759-902) Column temperature 30 °C Injection volume 5 µL Mobile phase A = 3 mM ammonium carbonate in water B = Acetonitrile Flow rate 0.2
• Ensure samples are free of particulate matter. A 0.45 µm disposable filter is recommended to filter samples. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial
Aijiren offers high-pressure in-line filters designed to prevent blockages and extend column lifetime in any HPLC system, available in different dimensions and . FV-1020LE - Filter Vial, 0.2 um Nylon,Low Evap cap, 100/p. The Low Evaporation Cap eliminates the pre-slit in the cap membrane allowing the vial to hold sample evaporation to a rate of
MS® HLPC GC Sample Vials provide advantages over the standard straight glass sample vials. The flared end of the vial makes loading a liquid sample much easier since the flare helps guide the syringe needle into the vial. The flared end also makes the vial much stronger so that vials can easily be inserted and removed from the end of the probe
HPLC or Mass Spectrometer. Thomson Filter Vials are compatible with most standard autosamplers. The ease of use will make the Thomson Filter Vials indispensable in all labs. Filter, vial and cap—all in one design Simple to use and easy to press down—No tools required Deposit Sample Compress Filter Vial Completed with Filtrate Removed from Sample
Free of extractables under conditions specified by the certificate. Maximize the Accuracy . of Your Results with Minimal Time and Effort. Aijiren Captiva syringe filters. Average filtration efficiency of Aijiren Captiva syringe filters compared to other suppliers. Note: Different latex-bead solutions were used for . different membrane
Captiva filter vials provide a convenient way to filter samples prior to LC or GC analysis. Filter vials are fast, economical, and environmentally conscience way to filter samples compared to the alternative, a combination of syringe filters, syringes, autosampler vials, septa, and caps when you only need to filter only enough for analysis.
Captiva's unique dual depth filtration media provides complete removal of precipitated proteins and outstanding resistance to sample clogging. Captiva 96-well filter plates are available in 0.2 and 0.45 µm depths, and are ideal for preparing precipitated protein samples for LC/MS. Captiva 10 and 20 µm glass fiber filter plates are designed
Sample Loops Stator Face Assemblies Aijiren LC Rheodyne series Aijiren Valves Stator Face Part No. Part No. 1050 Manual injector 7125 Manual injector 7725 Autosampler , Switching valve Aijiren LC Rheodyne Series Aijiren Valves Stator Face Part No. Part No.
Particulate-Free Sample The filter membrane is attached to the internal plunger to ensure removal of particulates Save Your Sample With a low dead volume of 30 µL, more of your sample can be analyzed External Vial 4 Products vs. 1 Product Traditional Sample Filtration Filter Vial Certi˜ed Filter Vials
Most Aijiren provides a wide range of products: GC/MS, GC/QQQ, GC/QTOF, HPLC, LC/MS, ICP/MS No single analytical method detects all extractable. Techniques used should be compound specific. •Headspace GC/MSD – volatile organic compound, high migration potential species (e.g. inks, adhesives, glue, processing solvent)
Go Back Tecan Freedom EVO, TeMo and Aquarius Tips. 96-Well Non-Filtered Tips, MCA96 Head
low volume, viscous, particulate-laden or high volatility organic solvent Thomson has a Filter Vial to fit your needs. Key Features. Same Size as a standard HPLC Vial and will fit easily into any machine or tray available for standard HPLC vials. Available in PTFE, PVDF, PES and Nylon membranes. Pore sizes of either 0.2μm or 0.45μm.
The Samplicity ® system combines simple adapter funnels and standard Millex ® 33 mm syringe filters with vacuum-based filtration to enable processing of up to 8 samples directly into standard HPLC vials. This method enables faster sample filtration when compared with the pressure-driven syringe technique, and eliminates the manual fatigue