Thomson SINGLE StEP Standard Filter Vials Recommended for samples containing less than 10% solid particulates. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers.
The Whatman Autovial Syringeless Filter replaces multiple syringe-coupled sample filtration devices with a single, disposable unit. Available in 5 or 12 mL capacity. Single unit convenience – pre-assembled and easy to load. Self-contained, preventing filter pop-off with hazardous samples. Range of sterile or nonsterile membrane media available.
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
Thomson SINGLE StEP Nano Filter Vials Ultra-low dead volume allows you to filter as little as 10 μL of sample and still obtain enough filtrate to make a 2 μL injection. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers.
Product Support. UniPrep™ Syringeless Filters are preassembled filtration devices for the filtration and storage of laboratory samples. These devices are quick and easy to use and feature a plunger, filter, and vial in one unit. They replace syringe-coupled filtration devices with single, disposable units. Integral storage vial saves time and
Jacketed and Unjacketed Glass Vessel Process Reactors and Filter Reactors from 100mL to 150L Single and parallel chemical process batch reactors Jacketed and unjacketed reactors Large scale, round bottom flask reactors Process filter reactors Click an image to explore each of the product lines. Single, Dual & Triple ChemRxnHubs™
Filter vials are a fast, economical, and environmentally conscience way to filter samples. The single, convenient and easy-to-use unit replaces the combination of syringe filters, syringes, autosampler vials, septa, and caps. With Captiva filter vials, there are fewer touchpoints in the sample journey, meaning fewer chances for contamination.
Eliminates Multiple Syringe Filters, Syringe, HPLC Vial, & CAP and reduces waste Easy to Press Down with Hand or Toggle Press increases efficiency and reduces fatigue Extends column life and reduces injector clogs reducing Costly Repairs & Service Issues
Thomson Filter Vials. No multiple step transfers needed. Pre-slit caps for all our filter vials for sale, with the exception of the low evaporation caps, ensure a no-hassle, clean aliquot withdrawal. No more breakage of expensive needles or coring problems on the HPLC or Mass Spectrometer. Thomson Filter Vials are compatible with most standard
May 1, 2019 · Preparing HPLC samples using traditional syringe filters often results in the loss of some sample in the syringe. This can make it difficult to get a reading and so you might just decide to save the trouble and not to use the filter at all. This is one of the reasons why we developed the Whatman Mini-UniPrep and glass-based Mini-UniPrep G2
Thomson nano|Filter Vial® offer a very low dead volume, allowing one to filter as little as 10μL of sample with enough remaining filtrate to make a 2μL injection. Applications include all low volume samples: analysis of enzymes, peptides, DNA, RNA, synthesis reaction intermediates, finished products, saliva. nano|Filter Vial® specifications
All-in-one filtration device for quick and cost-effective chromatography sample processing Eliminates the need for separate syringes, syringe membrane filters, vials, and septa Designed for use with an UHPLC or HPLC autosampler for high-throughput analysis 0.2 µm and 0.45 µm filter pore sizes available to meet filtration sample requirements
The Steriflip filter unit is designed to work with standard 50 mL centrifuge tubes, which eliminates sample transfer. To filter, just attach the unit to a 50 mL centrifuge tube containing your sample, flip it over, and apply the vacuum. When finished, the filtrate collects in the attached 50 mL centrifuge tube.
Mini-UniPrep filter vials for increased throughput Features: • inner glass storage vialConsists of an autosampler vial, plunger with attached membrane filter, and septum/cap • Designed to be loaded directly into the autosampler • Compatible with any autosampler that accommodates standard 12 × 32 mm profile vials (needle height of the
Separa® Filter Vial. The device consists of an internal insert with a membrane chamber and precut septa cap and an external vial. A sample ready to use after filtration. Pre-slitted cap ensures easy and clean sample transfer. Replace syringe, syringe filter, glass vial, and cap, reducing waste.