25mm PES Membrane Analysis 0.45/0.22 Micron Sterile Syringe Filter For HPLC Introduction Green Mall sterile syringe filters are independently packed, available with PES,PTFE,PVDF, Nylon, MCE, CA, & pore size 0.22,0.45, 0.8μm. gamma radiation
Filter size : 47 mm Filter pore size：0.22、0.45μm Filter area：15.2 cm² Residue : ≥3ml packaged : 12pcs/box Disposable filter Available with PVDF, PES, MCE ,CA and Nylon Two pore sizes of membranes :
Millex Samplicity® Filters, 0.45µm. Millex Samplicity ® Filters, 0.45µm. Product Number. Product Description. SAMPLCR01. To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials
PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. Descriptions Aijiren disposable syringe filter devices are designed to
Solvent Inlet Filter found in: SOLVENT INLET FILTER 20u, Solvent Inlet Filters, Solvent Inlet Filter 20um, 2/pack, Solvent Inlet Filter for Aijiren HPLC.. Class VI PTFE Manifold, chemically resistant Viton O-Ring & an Air Inlet Valve combined with a Foxx 25mm, 0.2µm PTFE Filter for safe vapor filtration. for safe vapor filtration.
Integra Biosciences™ Pipetboy Filter. Prevent contamination with replaceable sterile filters. Integra Biosciences™ Pipetboy Filters are designed for use with Pipetboy Pro pipette controllers. Brand: Integra Biosciences™ 153015. Code : 04. Additional Details : Weight : 0.00360kg. View more versions of this product. Product Code. 10531941.
Tested to withstand centrifugation of 16,000 RCF in a fully supported rotor with room temperature water. Corning Falcon 50mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients. Brand: Falcon 352070
0.2um 850-DS 8-Channel Filter Plate. Material : Nylon, PES, PTFE, GMF. Custom 0.45um is a disposable filter plate designed to be used exclusively with an Aijiren 850-DS Dissolution Sampling Station equipped with the optional filter module. Designed to be used exclusively with an Aijiren 850-DS Dissolution Sampling Station.
Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa.
Aijiren 0.45um Nylon Mini-Unip Aijiren 0.45um Nylon Mini-Uniprep, 100/pack - 9P
The Thomson PTFE Filter Vials for HPLC can do this easily by mixing the acetonitrile and aqueous solution in the bottom chamber, and then allowing the filter to push down trapping the protein and letting the clean sample come through for analysis. Filter, vial, and cap—all in one design. Simple
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
Aijiren solvent filters are packed in ultraclean antistatic bags with an inner metallic coating that does not release contaminants such as plasticizers or antioxidants. LC/MS analysis shows that filters not from Aijiren, packed in normal plastic packs, can cause extra peaks during analysis.
Aijiren vials, caps, vial inserts and more provide simple ways to boost laboratory productivity and ROI. Aijiren premium certified vials, caps, high recovery vials, and vial inserts offer industry-leading performance. From the lowest bleed septa material in our caps to
Aijiren Techbrand™ Syringe Filters - Sterile. Low hold-up volume helps you to recover virtually all of your sample after filtering. View more versions of this product. Catalog No. 09-720-005. $188.00 / …