HPLC Syringe Filter for Lab Analysis The syringe filters produced by Aijiren are of high quality, packaged and sold at reasonable prices. They are suitable for most major membrane materials, including nylon, PTFE, PES, MCE, PVDF, CA, PP and GF.
Designed for fast and reliable filtration of small to medium volumes. Sartorius Minisart™ High Flow (HF) Syringe Filters are complete, ready-to-connect units with a high-flow PES membrane. These 28mm filters are available in sterile and non-sterile options, with a 0.2 or 0.45μm pore size. Pricing and Availability.
Mar 11, 2020 · Hydrophilic 0.45um Sterile Nylon Syringe Filter is ideal for water-based (non-acidic) or organic sample preparation. In addition, nylon syringe filters for hplc, GC or solute test analysis are the most popular uses. The cost-selected 0.45um Sterile Nylon Syringe Filter sits in a variety of sizes and membrane types to meet any application needs.
Home » News » 9-425 » Common use glass HPLC Vials & Caps with patch for sale Common use glass HPLC Vials & Caps with patch for sale 1.5ml 9mm Short Thread Autosampler Vials ND9 are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification.
0.45 µm PES 0.2 µm PES 0.45 µm PVDF 0.2 µm PVDF 0.45 µm PTFE 0.2 µm PTFE 0.45 µm Nylon 0.2 µm Nylon Figure 1: The patented design of Thomson SINGLE StEP® filter vials allows you to perform sample clean-up in the same vial that goes into your autosampler. 32 mm 12 mm Dead volume 120 L Fill line volume 450 L Set needle depth to 5 mm from
use for your sample preparation. The RC membrane is broadly compatible with common HPLC sample solvents and mobile phases. • Improve efficiency with ready-to-use products – RC products are supplied ready for use. The hydrophilic, low-protein binding RC membrane is suitable for a wide variety of HPLC applications. Solvent compatibility Qualities
1-4mL Autosampler Vials for HPLC, UPLC, GC 6-20mL GC Headspace Vials 8-60mL EPA Storage Vials 16mm, 25mm Test Tubes for Water Analysis HPLC Syringe Filters About us Case
Verex Filter Vials are designed to provide simple and rapid sample preparation by incorporating a syringe, filtration membrane, vial, and cap/septa all into one product. Each filter vial is comprised of two parts: the external vial and internal plunger with an integrated filter and cap with a pre-slit PTFE/Silicone septa.
The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are used for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3
Verex HPLC, GC, and autosampler vials offer the lowest ion content possible to reduce sample loss and contamination. From start to finish, Verex HPLC, GC, and autosampler vial and cap products are manufactured to provide high quality, state-of-the-art solutions for your most challenging, sensitive applications.
Use with either snap or crimp top seals 13 mm (or 13-425) Compatible with Aijiren Technology 48 position WISP, Shimadzu Featured HPLC, GC, and Autosampler Vials AR0-3010-13 Verex Vial, 10mm Screw Top, 2mL, Clear 33, w/ Patch, 1000/PK Your Price $155.35
Vials. for HPLC/ GC /SFC and MS Analysis If Verex vials and caps do not perform as well or better than your current vial and cap products of similar type, dimensions, and material, return the product with comparative data within 45 days for a FULL REFUND. All Verex products are fully lot-tested and certified. The
SAMP2HPNB. This 33 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous solutions prior to chromatography or other instrument analyses.
Hydrophilic PES membrane consists of pure polyether sulfone polymers without support. It can provide good mechanical strength, thermal stability and broad chemical compatibility. It’s applicable for pure water filtration, particles removal of HPLC aqueous mobile phase, preventing column clogging.
Are Verex Filter Vials suitable for HPLC analysis? Yes, all Verex Filter Vials are able to be used with both HPLC and UHPLC analysis. What is the max fill and dead-volume for the Verex Filter Vials? The maximum fill in the external vial is 480 μL and moving past this could result in the loss of your sample. The dead-volume is 30 μL. Particulates