Easy-to-use Thomson SINGLE StEP filter vials provide fast sample filtration. Clean and Maintain Your FID with Kits and Replacement Parts • Cleaning kits for ANY injection port. • Handy maintenance kits with the most common consumable GC supplies and tools. SSENTIALSESSENTIALS 2020.3 www.restek.com
Housings. • Titan3™ filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. • Solutions at temperatures up to 100°C can be f ltered using Titan3™ syringe filters. • Syringe filters can be sterilized by autoclave at 125
Thomas Scientific’s continuous support and ongoing communication with site buyers to secure and deliver critical PPE during the COVID-19 pandemic were critical in avoiding site production interruptions. They were responsive and flexible, adjusting their allocations to meet AbbVie’s needs. One stop solution for your lab consumables and
filter, excellent and consistent recoveries were obtained through low to high levels for dimer and monomer. All of the other PVDF syringe filters gave very poor recoveries at low levels (0.1 and 0.2 mg/mL), especially for dimer. The results demonstrate that Captiva Premium PES filters can firmly support the analysis of low level protein samples
K. Syringe filters: 25 mm, 0.45 or 0.2 µm, nylon (optional: centrifugal filter) L. Polypropylene autosampler vials or micro-inserts (optional: Thomson Standard Filter Vials, 0.2 µm, nylon)
Jan 15, 2020 · The solution was filtered through a 0.2 μm nylon membrane filter and the concentration was determined using an extinction coefficient of 3.1 ± 0.1 cm −1 mM −1 at a wavelength of 594 nm (refs
Cultures less than 50mL may be inoculated directly from a glycerol stock or plate. To prepare a seed culture, use a glycerol stock or plate to inoculate 1/100th of the final culture volume of LB + appropriate antibiotic (e.g. 100 μg/mL ampicillin; 50 μg/mL kanamycin) and grow to saturation with shaking at 37°C.
The Tisch syringe filter design is an important laboratory supply that you can use across a broad variety of work and trust to provide your laboratory uncontaminated results. You can choose the Tisch Syringe Filter Product, as well as all your laboratory items, with the maximum assurance through www.scientificfilters.com.
Shop Thomson Instrument Company FILTER VIAL 0.45UM NYLON 500CS at Aijiren Techsci.com Aijiren Tech Scientific Filter Vial 0.45uM Nylon, 500/cs Pink Cap. Catalog No. 50-751-6353.
Thomson SINGLE StEP® Filter Vials • Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. • Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. • Pre-slit PTFE/silicone caps help eliminate broken autosampler needles and cored septa.
Filter Vial Completed with Filtrate Removed from Sample Fast and Easy to Use Fast Sample Filtration in One Easy Step Simply transfer your sample into the vial, press down on the plunger filterand your sample is ready for use in an autosampler. • An all-in-one replacement for the syringe, syringe filter, vial, cap and septum • Easy to press down
These filters can be used to filter heavy particulate loaded aqueous samples. The most common uses are for virus suspensions, biological suspensions, enzyme and buffers. These are also used in the cosmetics, personal care, water, and food/beverage industries. We provide these Nylon capsule filters with filtration areas in ranges of 400cm2 to
Tisch Scientific Nylon syringe filters provide a universal application for common analytical applications. Be sure to check the Nylon syringe filter compatibility information here. Also note that nylon-66 syringe filters are often compatible. Contact us for advise. Sterile Nylon syringe filters are available as well.
Similar to how a french press (cafetière à piston) works, Filter Vials filter particulates out of the sample with similar membranes used in syringe filters. The pressing of the plunger into the shell vial forces the sample up through a filter to separate the particulates from the sample to be analyzed. Thomson has several filter membranes and pore sizes to choose from making the Filter Vial a versatile tool in the lab.
Eliminates the need for separate syringes, syringe membrane filters, vials, and septa Designed for use with an UHPLC or HPLC autosampler for high-throughput analysis 0.2 µm and 0.45 µm filter pore sizes available to meet filtration sample requirements Compatible with most major autosamplers