Thomson SINGLE StEP Standard Filter Vials. Recommended for samples containing less than 10% solid particulates. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers.
Autosampler vials come in convenient pre-packaged sets. Other options include general-purpose clear or amber glass and plastic sample vials and cryogenic storage vials for cell culture and biological samples. Liquid scintillation counting vials, serum, dilution, and other specialty types are also available. Tubes
Filter vial, Max Fill Vol. 450uL, with a 0.22µm PTFE (Hydrophilic) membrane and a 11mm Snap cap with white silicone/cream ptfe septa Ultra low bleed (ULB) Unit/Measure. PK/100 Part No. VIF-PT-022-100-H-04
Filtration without material transfer Ideal for filtration involving recovery of solids High-density polyethylene coarse porosity disc (90-130 micron) and body Use directly or precoat for fine filtration Large filter has a serrated tubing connector Related Products: Coarse Porosity Compare this item Whatman Autovial Syringeless Filters Cytiva
• IV push drug dosages that need to be manipulated (e.g., vial-to-syringe transfer, syringe-to-syringe transfer, dilution, the need to use a partial vial or ampule, or more than one vial or ampule to prepare a dose) ™™ ™
Verex Filter Vials eliminates the need for separate syringes, syringe filters, vials, and caps/septum. By managing less products, these filter vials help streamline the sample preparation workflow and reduce lab waste. Potential sample loss and contamination are also reduced as multiple transfers are removed with this all-in-one filtration device.
Syringeless Filters. Available in a variety of filter media, syringeless filters allow you to process sample loads in a fraction of the time, providing a quick, economical, and environmentally conservative way to filter samples prior to HPLC analysis. These are preassembled filtration devices specially used in HPLC for the purification and
PES filter vials are a great choice for protein analysis applications due to their low protein binding. RC filters are suitable for general filtration for aqueous based samples. Nylon is a versatile filter for particulate filtration from both aqueous and organic matrices, while PTFE is most suitable for organic solvents.
Thomson nano|Filter Vials offer a low dead volume, allowing filtration with as little as 10 µl of sample with enough remaining filtrate to make a 2 µl injection.Available in a variety of filter media, syringeless filters allow you to process sample loads in a fraction of the time, providing a quick, economical, and environmentally conservative way to filter samples prior to HPLC analysis
very low dead volume. Thomson nano|Filter Vial® offer a very low dead volume, allowing one to filter as little as 10μL of sample with enough remaining filtrate to make a 2μL injection. Applications include all low volume samples: analysis of enzymes, peptides, DNA, RNA, synthesis reaction intermediates, finished products, saliva.
Jul 15, 2022 · integrity. Aijiren Captiva filter vials do the filtering for you, giving you one less step in your workflow. Benefits include: • Greater convenience: Filtration takes place inside the vial, reducing steps and tools. • Cleaner samples: Fewer touchpoints in your sample journey mean fewer chances for contamination.
Verex Filter Vials are a standard 12 x 32 mm vial and can be easily loaded into the autosampler All-in-one sample prep solution Combines sample storage, transfer, and filtration Identifiable colored caps Easily find the correct membrane and pore size Low dead-volume Higher sample recovery and increased sensitivity
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
consumables. These devices act both as filters and autosampler vials. Puradisc syringe filters provide quick, efficient filtration of samples up to 100 ml. The availability of a wide range of membranes enables the user to match a filter to their application needs, while offering quality and economy. Technical and safety tips Technical tip
Filter vial, Max Fill Vol. 450uL, with a 0.22µm PTFE (Hydrophilic) membrane and a 11mm Snap cap with white silicone/cream ptfe septa Ultra low bleed (ULB) Unit/Measure. PK/100 Part No. VIF-PT-022-100-H-04