Thomson Instrument Company FILTER VIAL 0.45UM NYLON 500CS Manufacturer: Thomson Instrument Company 35539500 Filter Vial 0.45uM Nylon, 500/cs Pink Cap
Accommodating A Variety of Sample Types. Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
Method: A. Water B. ACN 45-90% with .05% TFA Ballistic Gradient over 1.4 minutes using Aijiren Technology® Acquity® UPLC Thomson Filter Vial (patented) Part # 35540-500 Filter Vial 0.45μM hydrophobic PTFE, w/ Pre-Slit Cap Millipore Syringe Filter Part #:SLFHR04NL Millex-FH® Filter, 0.45M, hydrophobic PTFE, 4mm, non-sterile.
0.45um Nylon Syringe Filter. And the nylon membrane syringe filter produced by Aijiren can be used for alkaline blotting and fixation. If fixing methods such as baking and ultraviolet light are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in
Filter Vials 0.45um PVDF w/ pre-slit cap. Thomson SINGLE StEP eXtreme Yellow Cap, 100-pk Provide multilayer filtration for viscous samples and samples containing up to 30% solid 25877
Find 0.45um filter for virus and related products for scientific research at MilliporeSigma
Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon; Pre-slit PTFE/silicone caps help eliminate broken autosampler needles and cored septa; Rugged polypropylene vial houses insert with 450 μL loading capacity and low dead volume (120 μL)
7 Filter Vial Leachables Thomson Filter Vials are manufactured without the use of plastizers or mold release agents making them LC/MS clean. Testing with ELSD, PDA, and MS detection by Takeda Pharmaceutical showed no leaching from Thomson Standard Filter Vial with a 0.45um, PTFE
Applications for Thomson Filter Vials include all sample types to be analyzed by HPLC, UHPLC, LC-MS, and GC-MS. Max Fill Vol. 450 µL Dead Vol. 120 µL Standard Filter Vials (120μL Dead Volume) Thomson Standard Filter Vials(patented) can be used for samples containing less than 10% solid particulates.
Filter Vials, 0.45um Nylon w/pre-slit cap, Thomson SINGLE StEP, Pink Cap: 100-- Add to Cart: RK25893 Filter Vials, 0.2um PTFE w/pre-slit cap, Thomson SINGLE StEP, Green Cap: 100-- Add to Cart: RK25894 Filter Vials, 0.45um PTFE w/pre-slit cap, Thomson SINGLE StEP, Blue Cap: 100
Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa. See full list on restek.com
.45um. Portability, durability and safety are three huge advantages of Tisch Scientific capsule filters. The traditional membrane filters are typically fragile and require extreme caution during handling and usage. The membranes in our capsule filters are protected during handling, making them much less fragile than typical membrane filters.
5 bags of 100 vials each = 500 per box. i also have single bags of 100.
0.2, 0.45um pore size Shop SRI GCs SHOPPE-MalsCart-m5 Shop ChromTubing Shop Ferrules Shop Fittings ChromFittings-VICI ChromFittings-Jour Shop ChromVials PharmaVials Access Shop Filtration Shop GC Columns Shop MXT PLOT Columns MEGAColumns more SHOP2CT-m4 NEW Site Under Construction
Thomson SINGLE StEP Standard Filter Vials Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon.